Quote:
Originally Posted by dpl096
I'm sorry if I've read right past it but over at Adventure Riders it is posted that for the rear wheel alone we need:Rear Hub Bearing Sizes
(2) Rear Hub Bearings, Sprocket Side: 6202 2RS
(2) Rear Hub Bearings, Brake Rotor Side: 6302 2RS
(1) Sprocket Carrier Bearing: 6004 2RS
Spud is that your experience as well ? I mistook the posts as need only one each on the rear.
|
Thanks for reporting this information, Doug.
I had a problem with my stock rear hub, and CSC sent me a replacement. However, I suspect CSC sent me a hub from one of their test bikes, which had an earlier version of the hub. The replacement hub has two sprockets, as I have shown. However, I searched through my pile of used parts, and found the hub which originally came with my RX3. Indeed, it has four bearings. The sprocket side has two, 6202 2RS bearings, and the brake rotor side has two, 6302 bearings, as reported on ADVRider. The sprocket carrier has a single, 6004 2RS bearing.
I am editing my previous posts to correct the information.
__________________
Spud
"Never argue with an idiot. He will drag you down to his level, and beat you with experience."
Mark Twain
2015 Zongshen ZS250GY-3 (RX3)
2006 Zongshen ZS200GY-2 (Sierra 200)
2005 Honda XR650L
2004 Honda CRF250X
1998 Kawasaki KDX220
Mods made to my Zongshen ZS200GY-2:
http://www.chinariders.net/showthread.php?t=6894