[aaron7]

Originally Posted by humanbeing

Hopefully those = Typical chinese CG150 that based on Kymco 150 http://blog.xuite.net/tsai.kevin36/scooter/27916748 ... not the good old small-fin Honda https://translate.google.com/transla...3D1&edit-text=
http://translate.baiducontent.com/tr...en=&monLang=zh | http://www.motorfans.com.cn/forum.ph...uthorid=290040

Hmm, doesn't quite appear the same. I'll have to do some more digging!

Originally Posted by Mudflap

If you can get your hands on a mig welder, set a nut over the broken stud and weld the nut to the stud from the inside then unscrew it. Works nearly every time.

Definitely a good method! But the issue here is the studs have snapped inside the holes... no way to weld down in there. MIGHT get lucky drilling and easyoutting... but probably not.

Originally Posted by humanbeing

It's either M6 https://item.taobao.com/item.htm?id=15023169968 (the pdf said M6*35) or M8 https://item.taobao.com/item.htm?id=42510987721 . Took it out as #11 said & measures it...

Excellent! At least I have a lead on replacements if I can ever get these out.