|
No More Floppy Dong
Decided to nip the tip.
Sorry to any Honda purists out there. however if you've come this far you must be a sucker for punishment.
Markings were just for visual aid not a cutting guide.
I did a straight cut from both sides using normal hacksaw maintaining an angle and meeting in the center somewhat like a cross section if that make sense.
cleaned up and scuffed with 400grit
then found some left over Rust-oleum 2x spray paint+primer which seems to do ok on plastic so used it up as a primer.
currently is curing with a coat spray etch filler.
just another small step to keep the project ticking on.
|