ChinaRiders Forums - View Single Post

Sir kayakalot · 01-07-2017, 08:25 AM

Yes adjusting the valves is definitely on my to-do list.
I forgot to mention that while I had the pipe off I ground down
the weld on the inside of the pipe where it butts up to the
motor. It was ridiculous how big that weld was.

01-07-2017, 08:25 AM	#13
Sir kayakalot Join Date: Dec 2016 Posts: 269	Yes adjusting the valves is definitely on my to-do list. I forgot to mention that while I had the pipe off I ground down the weld on the inside of the pipe where it butts up to the motor. It was ridiculous how big that weld was.
	3