ChinaRiders Forums - View Single Post - Zongshen RX3 (ZS250GY-3): Delphi Multec EFI

SpudRider · 10-08-2014, 03:19 AM

Here is the connector pin information for the Delphi MT05 ECM.

Neither connector appears to fit the OBD2 scanner connector, which is shown below.

The OBD2 pin connections are described in the following link.

http://www.obdii.com/connector.html

The Delphi MT05 uses a 6-pin connector for diagnostics, as shown in the photograph below.

Therefore, it seems we will need to make an adapter to connect the appropriate pins of the OBD2 connector to the 6-pin Delphi connector. Likewise, we could also make an adapter to connect the OBD2 connector to one of the 18-pin connectors on the MT05 ECM itself.

10-08-2014, 03:19 AM	#18
SpudRider Join Date: Jul 2008 Location: Idaho Posts: 25,054	Here is the connector pin information for the Delphi MT05 ECM. Neither connector appears to fit the OBD2 scanner connector, which is shown below. The OBD2 pin connections are described in the following link. http://www.obdii.com/connector.html The Delphi MT05 uses a 6-pin connector for diagnostics, as shown in the photograph below. Therefore, it seems we will need to make an adapter to connect the appropriate pins of the OBD2 connector to the 6-pin Delphi connector. Likewise, we could also make an adapter to connect the OBD2 connector to one of the 18-pin connectors on the MT05 ECM itself. __________________ Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 Last edited by SpudRider; 10-08-2014 at 06:52 AM.
	0