View Single Post
Old 10-07-2014, 08:31 AM   #1
SpudRider   SpudRider is offline
 
SpudRider's Avatar
 
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
Zongshen RX3 (ZS250GY-3): Delphi Multec EFI

The Zongshen RX3 employs Delphi Multec Electronic Fuel Injection, which is documented at the Delphi website.

http://www.delphi.com/manufacturers/...wertrain/small

http://www.delphi.com/docs/default-s...f.pdf?sfvrsn=0



Single cylinder motorcycles, such as the Zongshen RX3, employ a system using the MT05 engine control module (ECM).

http://www.delphi.com/manufacturers/...owertrain/mt05

http://www.delphi.com/docs/default-s...f.pdf?sfvrsn=0

This ECM receives information from a number of sensors.

Zongshen provides the crank sensor, which is located inside the Zongshen NC250 engine.

The engine temperature sensor measures coolant temperature, and is located in the thrermostat housing under the fuel tank.

The oxygen sensor is attached to a bung on the exhaust header.

http://www.delphi.com/manufacturers/...in/mini_swh_ox

http://www.delphi.com/docs/default-s...f.pdf?sfvrsn=0

The manifold absolute pressure (MAP) sensor, manifold air temperature (MAT) sensor, and fuel injector are attached to the intake manifold.

The throttle position sensor is incorporated in the Delphi throttle body.

http://www.delphi.com/manufacturers/...rain/etc_tb_sm

http://www.delphi.com/docs/default-s...f.pdf?sfvrsn=0

A fuel pump, which provides pressurized fuel to the fuel injector, is located inside the fuel tank.

http://www.delphi.com/manufacturers/...rain/sm_eng_fm

http://www.delphi.com/docs/default-s...f.pdf?sfvrsn=0
__________________
Spud

"Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain

2015 Zongshen ZS250GY-3 (RX3)
2006 Zongshen ZS200GY-2 (Sierra 200)
2005 Honda XR650L
2004 Honda CRF250X
1998 Kawasaki KDX220

Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894



Last edited by SpudRider; 11-24-2015 at 02:16 AM.
 
Reply With Quote