|
Ok I got my new carb on installation went good. However it is idling way to high. I can turn the idle screw in and make it idle even higher but when I back the screw out I can't drop the idle down into the 1500rpm range. It stops dropping around 2000rpm. Do I need to purchase a couple smaller pilot jets? While I'm at it do I need to purchase a couple smaller main jets? I currently don't know what size jets I have. But the reason I bought this Mikuni carb is so I can re jet it and hopefully get the optimum tune. Also where should I set the needle position? My needle has what looks to be at least 6 or so clip positions. Thats whats good about these Mikunis is they are so adjustable.
Thanks for the help.
/
|