ChinaRiders Forums - View Single Post - New Zongshen RX3 (ZS250GY-3) Dual Sport

SpudRider · 09-13-2015, 01:30 AM

Today I adjusted the valve lash on my RX3 with 9,750 miles on the odometer. The exhaust valves had tightened a little, but were still in spec. The intake valves had clearance, but were tight enough so I couldn't get a 0.04 feeler gauge underneath them. I think it is wise to check the valve lash every 5,000 miles, as CSC recommends.

09-13-2015, 01:30 AM	#4098
SpudRider Join Date: Jul 2008 Location: Idaho Posts: 25,054	Today I adjusted the valve lash on my RX3 with 9,750 miles on the odometer. The exhaust valves had tightened a little, but were still in spec. The intake valves had clearance, but were tight enough so I couldn't get a 0.04 feeler gauge underneath them. I think it is wise to check the valve lash every 5,000 miles, as CSC recommends. __________________ Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894
	0