Quote:
Originally Posted by jimjr21
Making a stroker crank is easy. Just go to a smaller crank pin diameter. However that is also a way to make it less reliable.
I will be looking for a reliable way to make a stroker crank. However it needs to be 3+mm or no go as power gain would be minimal for an expensive assembly.
|
How dose going to a smaller crank pin diameter increass the stroke ?
Stoke is the centre line of the crank pin & main journal X2
the Dia of either has no bearing on the stoke..
to increass the stroke you have to move the centre line of them
ferther apart...
__________________
09 XT660R ...
06 TTR250 ...
80 Montesa H6 125 Enduro...
77 Montesa Cota 348 MRR "Malcom Rathnell Replica"...
Current resto projects..
81 Honda CT110...
80 Kawasaki KL250A1...
11 Husaburg TE125 enduro... "sold" along with another 31...
Lifan 125 Pitbike.. "stolen" ...
KIWI BIKER FORUM......
http://www.kiwibiker.co.nz/forums/content.php
All the best offroad rides in NZ...
http://www.remotemoto.com/
E-mail...
xtpete1@gmail.com