ChinaRiders Forums - View Single Post - RX3: Engine Top End Rebuild at 22,450 Miles

SpudRider · 04-27-2017, 02:39 AM

Here are several photographs of my RX3 with the engine removed from the frame.

This photograph was taken from the right side of the motorcycle.

This photograph was taken from the left side of the motorcycle.

In both of the above photographs you can see two red wires piggybacked onto the wiring harness. These red wires are connected to the accessory plugs and power the auxiliary lights on my upper and lower engine guards.

04-27-2017, 02:39 AM	#5
SpudRider Join Date: Jul 2008 Location: Idaho Posts: 25,054	Here are several photographs of my RX3 with the engine removed from the frame. This photograph was taken from the right side of the motorcycle. This photograph was taken from the left side of the motorcycle. In both of the above photographs you can see two red wires piggybacked onto the wiring harness. These red wires are connected to the accessory plugs and power the auxiliary lights on my upper and lower engine guards. __________________ Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894
	2