ChinaRiders Forums - View Single Post

rjmorel · 02-23-2017, 01:05 AM

JB, for what it's worth , I have been running 55/65 bulb for some time and all I did was take a 1/2" drill and drill 3 or 4 cooling holes above and below where the bulb goes into the shell. And maybe some smaller holes on top and bottom of the reflecter if my memory is working right to allow air to circulate. I havn't noticed any melting of headlight reflector or shell. I usually ride with low beam on so maybe it's not getting that hot. rj

02-23-2017, 01:05 AM	#3
rjmorel Join Date: May 2007 Location: Warshington Posts: 928	JB, for what it's worth , I have been running 55/65 bulb for some time and all I did was take a 1/2" drill and drill 3 or 4 cooling holes above and below where the bulb goes into the shell. And maybe some smaller holes on top and bottom of the reflecter if my memory is working right to allow air to circulate. I havn't noticed any melting of headlight reflector or shell. I usually ride with low beam on so maybe it's not getting that hot. rj __________________ Live Zong, and Prosper
	2