View Single Post
Old 10-23-2016, 12:43 PM   #5
Ghenghis   Ghenghis is offline
 
Join Date: Oct 2016
Location: Midwest
Posts: 21
Soon as I mutila...... modify a plug I'll post a picture up here with my results.

Does the seat on the Hawk seem like it would be better if it dipped down just a bit more in the middle to anyone else? Height isn't a problem, I'm 6'2", it just seems like i'm sitting a bit high.

Edit:I'll try shortening the J strap on the stock plug first and see if I get any noticeable differences. I should probably get it running smooth first. I pulled the carburetor, took it apart, adjusted the idle mix screw, now it bogs at half throttle right when the main jet is kicking in. Unsure if it's starving or too rich, haven't spent much time on it yet. I've tried anywhere from 1 turn out to 2 turns out, it seems to lessen the stumble/bog at 1 turn out but doesn't get rid of it. Ran fine after putting it together from the shipping crate, I'm sure the bogging is from something I did while removing the carb and tearing it apart.


 
Reply With Quote