When the OCS is positioned as show below, the internal screen is in the
correct position, with the cone of the screen at the top.
Since we can't see
inside the OCS for the proper orientation of the
screen, we use the
external location of objects to verify the proper orientation.
The tube should be located at the top of the OCS. The clamp should be located at the bottom of the OCS.
__________________
Spud
"Never argue with an idiot. He will drag you down to his level, and beat you with experience."
Mark Twain
2015 Zongshen ZS250GY-3 (RX3)
2006 Zongshen ZS200GY-2 (Sierra 200)
2005 Honda XR650L
2004 Honda CRF250X
1998 Kawasaki KDX220
Mods made to my Zongshen ZS200GY-2:
http://www.chinariders.net/showthread.php?t=6894