|
Those "wings" on the tool are dumb. They'll hit the cooling fins on the head on a cg clone (229cc) or 249cc engine (172FMM). I use a big screwdriver. But it's soft aluminum, easily damaged. And you need it tight so you don't lose it on the trail!.
I like the 10mm Allen wrench style plug on the 6speed 172FMM (249cc) rotor nut access. I wish they did that on the timing port.
__________________
-2022 5 speed Templar X Orange, OEM 51T rear sprocket, 14T front sprocket
-NOS 2020 KTM 250SX (2-stroke motocross), less than 10 hours on it
|