Removing the Rocker Cover, Camshaft, Cylinder Head, Cylinder, and Piston
Perform the following, preliminary steps.
Remove the fuel tank.
Drain the coolant.
Remove the radiator hoses from the cylinder head and water pump.
Remove both radiators from the frame.
Remove the exhaust header.
Remove the perimeter engine bracket.
Remove the entire engine from the frame of the motorcycle.
Set the crankshaft to TDC on the compression stroke, which will release pressure on the rockers and all four valves. Remove the two plug bolts from the cylinder head to verify the camshaft is in the proper position.
__________________
Spud
"Never argue with an idiot. He will drag you down to his level, and beat you with experience."
Mark Twain
2015 Zongshen ZS250GY-3 (RX3)
2006 Zongshen ZS200GY-2 (Sierra 200)
2005 Honda XR650L
2004 Honda CRF250X
1998 Kawasaki KDX220
Mods made to my Zongshen ZS200GY-2:
http://www.chinariders.net/showthread.php?t=6894