ChinaRiders Forums - View Single Post - Brozz 250 Speedo Correction using SpeedoDRD

Musictrek · 10-30-2020, 01:44 AM

Attachment 23206I installed the SpeedoDRD on the Brozz 250 with success and programed the little device with accuracy to a GPS signal with ease. The Brozz has three wires coming off the wheel signal sensor. The wires are Red, Green and Yellow. When wiring up the SpeedoDRD. The signal wire coming from the Brozz is the Red wire. Green is common ground and Yellow is positive. I believe any of the SpeedoDRD would work to wire up cause none of them have the right plug and play connections. I just clipped the connectors off and just hard wired to the wires coming from the wheel signal side. I can still unplug the connector from the digital display if needed.
https://www.amazon.com/gp/product/B0...88a677cb318cac

https://radpaul.weebly.com/brozz-and-hawk-250.html

10-30-2020, 01:44 AM	#1
Musictrek Join Date: Jan 2017 Location: Arizona Posts: 463	Brozz 250 Speedo Correction using SpeedoDRD Attachment 23206I installed the SpeedoDRD on the Brozz 250 with success and programed the little device with accuracy to a GPS signal with ease. The Brozz has three wires coming off the wheel signal sensor. The wires are Red, Green and Yellow. When wiring up the SpeedoDRD. The signal wire coming from the Brozz is the Red wire. Green is common ground and Yellow is positive. I believe any of the SpeedoDRD would work to wire up cause none of them have the right plug and play connections. I just clipped the connectors off and just hard wired to the wires coming from the wheel signal side. I can still unplug the connector from the digital display if needed. https://www.amazon.com/gp/product/B0...88a677cb318cac https://radpaul.weebly.com/brozz-and-hawk-250.html Attached Images Last edited by Musictrek; 11-09-2020 at 10:27 PM.
	1