|
Check to make sure the slide is installed correctly. Look through the carb from the filter side toward the motor. The slide should be all the way down or close to it. If not, then it's in backwards. There are pins on both sides of the carb throat, one higher than the other that line up with the grooves on the slIde. If I remember correctly, Weldangrind (a poster here) stated that the beveled part of the slide faces the idle adjustment screw.
Human Being will be along with the info about the kill switch.
__________________
2012 Kawasaki Versys
1984 Honda Magna V65
2016 Rhino 250
2016 Tao Tao 125D
|