ChinaRiders Forums - View Single Post

SpudRider · 12-07-2015, 04:07 AM

Starter Motor

The starter motor is attached to the engine behind the cylinder by two bolts.

The driving gear of the starter motor enters the right crankcase half to engage the reduction gears, as shown inside the red oval in the photograph below.

Starter Clutch (Sprag Clutch) Inspection

The starter clutch is located inside the yellow circle in the photograph above. The starter clutch should rotate freely when turned clockwise; it should lock when turned counter-clockwise.

12-07-2015, 04:07 AM	#1
SpudRider Join Date: Jul 2008 Location: Idaho Posts: 25,054	Zongshen RX3: Starter Motor System Starter Motor The starter motor is attached to the engine behind the cylinder by two bolts. The driving gear of the starter motor enters the right crankcase half to engage the reduction gears, as shown inside the red oval in the photograph below. Starter Clutch (Sprag Clutch) Inspection The starter clutch is located inside the yellow circle in the photograph above. The starter clutch should rotate freely when turned clockwise; it should lock when turned counter-clockwise. __________________ Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 Last edited by SpudRider; 12-08-2015 at 02:32 PM.
	0