Quote:
Originally Posted by Weldangrind
Not for long. The chamber has such low volume that you'll expel most of it by just checking the pressure.
|
Quote:
Originally Posted by SpudRider
Yes, if the shock contains nitrogen, I realize by merely checking the gas pressure, I will also need to arrange for one of the local shops to recharge the nitrogen.  However, the QLink XP200 had a shock which set the preload with a low pressure of air. I need to call CSC, and verify the design of the shock absorber for the Zongshen RX3. |
I called CSC this morning, and got some information regarding the shock absorber. Indeed, the shock does contain nitrogen, and the pressure of the gas might be as high as 320-375 psi. I'm sure if the nitrogen pressure were low, my shock would not be functioning as well as it is.
I am on the hunt for an aftermarket shock absorber. Is anyone else interested in upgrading the stock shock absorber?
__________________
Spud
"Never argue with an idiot. He will drag you down to his level, and beat you with experience."
Mark Twain
2015 Zongshen ZS250GY-3 (RX3)
2006 Zongshen ZS200GY-2 (Sierra 200)
2005 Honda XR650L
2004 Honda CRF250X
1998 Kawasaki KDX220
Mods made to my Zongshen ZS200GY-2:
http://www.chinariders.net/showthread.php?t=6894