ChinaRiders Forums - View Single Post - Zongshen RX3: Electrical System Maintenance

SpudRider · 11-22-2015, 02:56 AM

Testing the Starter Motor Relay

Verify the relay is wired properly. The cable from the battery must be connected to the relay terminal identified with the letter B (battery). The other terminal identified with the letter M (Motor) should be connected to the cable going to the starter.

The internal resistance of the starter relay should be 4 ohms.

11-22-2015, 02:56 AM	#11
SpudRider Join Date: Jul 2008 Location: Idaho Posts: 25,054	Testing the Starter Motor Relay Verify the relay is wired properly. The cable from the battery must be connected to the relay terminal identified with the letter B (battery). The other terminal identified with the letter M (Motor) should be connected to the cable going to the starter. The internal resistance of the starter relay should be 4 ohms. __________________ Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 Last edited by SpudRider; 11-22-2015 at 03:31 AM.
	0