ChinaRiders Forums - View Single Post - Zongshen RX3: 21-inch Front Wheel

SpudRider · 11-05-2016, 04:51 AM

After raising the fender, the front of the forks still seem to be pretty well protected from rock impacts, which could damage the inner fork tubes. However, the inner fork tubes now do collect more mud and dust. Therefore, I installed a pair of 6" Shock Sox to help clean the forks, and protect the fork oil seals.

I am going to trim a bit from the lower fork guards (chevrons) to prevent them from rubbing the Shock Sox.

http://bermmotorsports.com/products/...ular-shock-sox

11-05-2016, 04:51 AM	#3
SpudRider Join Date: Jul 2008 Location: Idaho Posts: 25,054	After raising the fender, the front of the forks still seem to be pretty well protected from rock impacts, which could damage the inner fork tubes. However, the inner fork tubes now do collect more mud and dust. Therefore, I installed a pair of 6" Shock Sox to help clean the forks, and protect the fork oil seals. I am going to trim a bit from the lower fork guards (chevrons) to prevent them from rubbing the Shock Sox. http://bermmotorsports.com/products/...ular-shock-sox __________________ Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 Last edited by SpudRider; 11-07-2016 at 02:25 AM.
	1