ChinaRiders Forums - View Single Post

rojo_grande · 08-30-2016, 10:38 PM

Got the tach cluster installed.

Looks great. Easy install. The instructions were clear, correct, and concise. I taped the tach cluster wires/harness to a 1/8" dowel I had laying around to pull the wires through the rubber wiring harness boot. A piece of stout wire or coat hanger would also do the trick. I only needed a few zip ties to tidy everything up. Did a quick lap around the block to test it all out. No issues what so ever. So easy even a Sasquatch can do it

Thanks very much to mjstef for doing all the leg work and R&D.

While I had the bike stripped down I installed a 12v/usb power outlet.

08-30-2016, 10:38 PM	#24
rojo_grande Join Date: Jun 2015 Location: Weston, CO & Sangre de Cristos Posts: 240	Intalled Got the tach cluster installed. Looks great. Easy install. The instructions were clear, correct, and concise. I taped the tach cluster wires/harness to a 1/8" dowel I had laying around to pull the wires through the rubber wiring harness boot. A piece of stout wire or coat hanger would also do the trick. I only needed a few zip ties to tidy everything up. Did a quick lap around the block to test it all out. No issues what so ever. So easy even a Sasquatch can do it Thanks very much to mjstef for doing all the leg work and R&D. While I had the bike stripped down I installed a 12v/usb power outlet. Attached Images __________________ '15 RX3 (Rojo's) '15 RX3 (marzhere's) '16 TT250
	4