Good place to start with idle screw VM26

shelbyzman · 01-04-2022, 02:59 PM

I put a VM26 on my 200cc 163fml dirt bike. Any suggestions on where to start with the idle screw? Ex: 2 turns out from tight or way looser? thanks!

tknj99 · 01-04-2022, 03:25 PM

If it came with a 20 pilot then maybe moving to a 25 may be the better route to take and then fine-tune with the a/f screw, which is what im doing with mine

01-04-2022, 02:59 PM	#1
shelbyzman Join Date: Dec 2021 Posts: 26	Good place to start with idle screw VM26 I put a VM26 on my 200cc 163fml dirt bike. Any suggestions on where to start with the idle screw? Ex: 2 turns out from tight or way looser? thanks!
	0

01-04-2022, 03:25 PM	#2
tknj99 Join Date: Oct 2020 Location: Central VA Posts: 1,258	If it came with a 20 pilot then maybe moving to a 25 may be the better route to take and then fine-tune with the a/f screw, which is what im doing with mine __________________ 2024 Zuma Storm 150 DLX 2019 Beta 430 RRS 2018 VStrom 1000 XT Former China Bikes: Tao DBX1, Brozz 250, CSC RX4, Titan DLX, Templar X
	0