![]() |
#1 |
Join Date: Apr 2022
Location: NYC/PA
Posts: 20
|
Templar M keeps stalling
Hey guys, I posted a while ago about how my bike started cutting out after it warmed up well now it has progressed to the point that now it dies after a few minutes of riding. The only way for me to get it restarted is to mess with the choke adjustment and for some reason that will allow it to start and run for a few minutes before it dies again and I repeat the whole process. I pulled my spark plug and I think it's running rich? I also have to adjust the valves but I don't have space right now to pull the gas tank and all that off. I attached a picture of the spark plug, I'd greatly appreciate some help bc this is quite annoying.
|
![]() |
![]() |
#2 |
Join Date: Feb 2021
Location: Kansas City
Posts: 2,396
|
That plug does not look sooty at all. Have you rejet? What's you elevation. If it is original, bump 40 pilot jet to 42 and shim the needle. Air screw to about a turn and a half. This should be OK to 1500 or even 2000 feet.
__________________
-2022 5 speed Templar X Orange, OEM 51T rear sprocket, 14T front sprocket -NOS 2020 KTM 250SX (2-stroke motocross), less than 10 hours on it |
![]() |
|
![]() |
![]() |
|
|