Go Back   ChinaRiders Forums > Technical/Performance > Dual Sport/Enduro
Register FAQ Community Calendar Today's Posts Search
Reply
 
Thread Tools Search this Thread Display Modes
Old Today, 07:33 AM   #1
NYCDiesel   NYCDiesel is offline
 
Join Date: Apr 2022
Location: NYC/PA
Posts: 20
Templar M keeps stalling

Hey guys, I posted a while ago about how my bike started cutting out after it warmed up well now it has progressed to the point that now it dies after a few minutes of riding. The only way for me to get it restarted is to mess with the choke adjustment and for some reason that will allow it to start and run for a few minutes before it dies again and I repeat the whole process. I pulled my spark plug and I think it's running rich? I also have to adjust the valves but I don't have space right now to pull the gas tank and all that off. I attached a picture of the spark plug, I'd greatly appreciate some help bc this is quite annoying.
Attached Thumbnails
Click image for larger version

Name:	sparkplug.jpg
Views:	5
Size:	341.1 KB
ID:	31602  


 
Reply With Quote
Old Today, 07:57 AM   #2
Thumper   Thumper is online now
 
Thumper's Avatar
 
Join Date: Feb 2021
Location: Kansas City
Posts: 2,396
That plug does not look sooty at all. Have you rejet? What's your elevation. If it is original, bump 40 pilot jet to 42 and shim the needle. Air screw to about a turn and a half. This should be OK to 1500 or even 2000 feet.
__________________
-2022 5 speed Templar X Orange, OEM 51T rear sprocket, 14T front sprocket
-NOS 2020 KTM 250SX (2-stroke motocross), less than 10 hours on it



Last edited by Thumper; Today at 08:54 AM.
 
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:15 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.