2006 lifan gy200 wiring help

Jamez1991 · 04-15-2015, 05:21 PM

Hi i am new to bikes all together and i am wanting to completely redo my whole wiring harness and simplify it as much as possible. As of right now it is not running (it died while riding and never would start again). It is both electric and kick start but if possible i would like to convert it to kick start only and also get rid of horns lights etc. Any help would be amazing ive looked all over the internet with no luck.

Thanks

Adjuster · 04-15-2015, 06:14 PM

Do you have any idea why it currently isn't starting/running? Do you believe it to be an electrical issue? Did you turn the bike off with the kill switch?

/

Weldangrind · 04-16-2015, 01:26 AM

Welcome!

X2 on Adjuster's questions. I'd get it running before trying to alter the harness.

Jamez1991 · 04-17-2015, 12:11 AM

The bike shut off while riding and never started again after looking I noticed the cdi appeared melted and I was getting no spark even after replacing cdi

Jamez1991 · 04-17-2015, 01:20 AM

The bike shut off while riding and never started again after looking I noticed the cdi appeared melted and I was getting no spark even after replacing cdi also I would like to know if I can make this bike work without a battery

humanbeing · 04-17-2015, 01:33 AM

Check source coil's ohm reading. http://www.dansmc.com/electricaltesting.htm

Jamez1991 · 04-19-2015, 03:32 PM

Any idea if I can wire it to run without a battery or wire it to be kick start only

humanbeing · 04-19-2015, 05:58 PM

Mudflap · 04-19-2015, 07:22 PM

If it's the same as my 07 Lifan 200 GY5 it will run without the battery and all the lights will still work.

Quote:

Originally Posted by Jamez1991

Any idea if I can wire it to run without a battery or wire it to be kick start only

Weldangrind · 04-20-2015, 11:16 AM

Quote:

Originally Posted by Jamez1991

Any idea if I can wire it to run without a battery or wire it to be kick start only

I'm sure you could, but I would never give up the magic button.

Jamez1991 · 04-24-2015, 09:37 PM

How would I go about wiring it for,kickstart only. Any,and all info is much appreciated

humanbeing · 04-24-2015, 11:35 PM

Quote:

Originally Posted by Jamez1991

How would I go about wiring it for,kickstart only. Any,and all info is much appreciated

Is that bike back to working order?
---
Unplug those unnecessary. The cdi principle as #6 . The RiGHT part from alternator is NOT NEED in no battery mode.

Jamez1991 · 05-08-2015, 12:51 AM

I believe it is a faulty wiring harness. On the,lifan allgrounds come together under the seat.

04-15-2015, 05:21 PM	#1
Jamez1991 Join Date: Apr 2015 Posts: 6	2006 lifan gy200 wiring help Hi i am new to bikes all together and i am wanting to completely redo my whole wiring harness and simplify it as much as possible. As of right now it is not running (it died while riding and never would start again). It is both electric and kick start but if possible i would like to convert it to kick start only and also get rid of horns lights etc. Any help would be amazing ive looked all over the internet with no luck. Thanks
	0

04-16-2015, 01:26 AM	#3
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	Welcome! X2 on Adjuster's questions. I'd get it running before trying to alter the harness. __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

04-19-2015, 05:58 PM	#8
humanbeing Join Date: Mar 2008 Posts: 2,436	__________________
	0

04-15-2015, 06:14 PM	#2
Adjuster Join Date: Dec 2014 Location: Deerfield Beach FL Posts: 1,410	Do you have any idea why it currently isn't starting/running? Do you believe it to be an electrical issue? Did you turn the bike off with the kill switch? /
	0

04-17-2015, 12:11 AM	#4
Jamez1991 Join Date: Apr 2015 Posts: 6	The bike shut off while riding and never started again after looking I noticed the cdi appeared melted and I was getting no spark even after replacing cdi
	0

04-17-2015, 01:20 AM	#5
Jamez1991 Join Date: Apr 2015 Posts: 6	The bike shut off while riding and never started again after looking I noticed the cdi appeared melted and I was getting no spark even after replacing cdi also I would like to know if I can make this bike work without a battery
	0

04-17-2015, 01:33 AM	#6
humanbeing Join Date: Mar 2008 Posts: 2,436	Check source coil's ohm reading. http://www.dansmc.com/electricaltesting.htm __________________
	0

04-19-2015, 03:32 PM	#7
Jamez1991 Join Date: Apr 2015 Posts: 6	Any idea if I can wire it to run without a battery or wire it to be kick start only
	0

04-24-2015, 09:37 PM	#11
Jamez1991 Join Date: Apr 2015 Posts: 6	How would I go about wiring it for,kickstart only. Any,and all info is much appreciated
	0

05-08-2015, 12:51 AM	#13
Jamez1991 Join Date: Apr 2015 Posts: 6	I believe it is a faulty wiring harness. On the,lifan allgrounds come together under the seat.
	0