|
|
|
|
Thread Tools | Search this Thread | Display Modes |
04-04-2021, 12:34 AM | #1 |
Join Date: Mar 2021
Location: Oregon and Nebraska
Posts: 10
|
An update on my KP mini. (Help? Anyone ever had a similar problem?)
Ok so I turned the idle screw on my kp up and she ran!!! But still somewhat rough and at a very high RPM. What should I do? Carburetor blockage? New carb? Re jet (and how?) thanks y’all! Here is a video of the problem:
|
|
04-11-2021, 09:38 AM | #2 |
Join Date: Nov 2019
Posts: 99
|
Check the obvious things first, plug and wire. Make sure the throttle cable is binding on anything. Make sure the choke cable isn't sticking. Check your Air/Fuel screw and Idle screws.
Check your valves for proper clearance (engine needs to be cold). |
|
04-11-2021, 09:44 AM | #3 |
Join Date: Nov 2017
Location: Marseille, France -> Conakry, Guinea
Posts: 1,481
|
To clarify, cooled off overnight.
|
|
04-11-2021, 09:52 PM | #4 |
Join Date: Mar 2021
Location: Oregon and Nebraska
Posts: 10
|
Where is the air/fuel screw on the kp mini? I’ll check throttle. Choke cable is fine. Valves... well I may have to have someone do that... I’ll check the spark plug and wire too.
|
|
|
|
|
|