Carb jet question - TaoTao

sindrome · 08-22-2013, 08:27 PM

This question got buried too deep in my last post, so here goes:

I bought a "TaoTao" 24mm carb and wondering if anyone knows what kind of jets this takes or what this carb is a copy of ?

Weldangrind · 08-22-2013, 09:41 PM

Sorry, not a clue. I recommend that you remove the jets and compare them with pics on www.jetsrus.com

sindrome · 08-23-2013, 11:36 PM

After checking jetsrus, it looks like Keihin parts will work. For the carb we have, the mainjet matches to #99101-116. The installed jet is a #74
The slow jet best matches the Keihin "3J", and is a #K32 the overall length is about 1mm less on the Kiehin part, but I don't think that will affect anything.

Weldangrind · 08-25-2013, 12:38 PM

As long as the seating surface to the the tip of the emulsion tube is the same length and diameter, my guess is that there would be no difference. Now that you have a baseline, you might find the jets cheaper on eBay, perhaps even an assorted pack.

08-22-2013, 08:27 PM	#1
sindrome Join Date: Aug 2012 Posts: 18	Carb jet question - TaoTao This question got buried too deep in my last post, so here goes: I bought a "TaoTao" 24mm carb and wondering if anyone knows what kind of jets this takes or what this carb is a copy of ?
	0

08-22-2013, 09:41 PM	#2
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	Sorry, not a clue. I recommend that you remove the jets and compare them with pics on www.jetsrus.com __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

08-25-2013, 12:38 PM	#4
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	As long as the seating surface to the the tip of the emulsion tube is the same length and diameter, my guess is that there would be no difference. Now that you have a baseline, you might find the jets cheaper on eBay, perhaps even an assorted pack. __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

08-23-2013, 11:36 PM	#3
sindrome Join Date: Aug 2012 Posts: 18	After checking jetsrus, it looks like Keihin parts will work. For the carb we have, the mainjet matches to #99101-116. The installed jet is a #74 The slow jet best matches the Keihin "3J", and is a #K32 the overall length is about 1mm less on the Kiehin part, but I don't think that will affect anything.
	0