Go Back   ChinaRiders Forums > Technical/Performance > Pure Dirt
Register FAQ Community Calendar Today's Posts Search
Reply
 
Thread Tools Search this Thread Display Modes
Old 08-20-2020, 12:43 PM   #1
veryrigged   veryrigged is offline
 
veryrigged's Avatar
 
Join Date: Aug 2020
Posts: 8
Baja DR125 Starts and Dies after a couple seconds

Hey guys!

Ran into a new problem today. I've been able to run this bike perfectly all week, but after cranking it over today, it would run perfect, I could even get the rpms high without it bogging any, but after a few seconds, it just dies. I'd let it sit for a couple minutes, and crank it over again and it would fire right up, then die a couple seconds later. It has a brank new 26mm nibbi carb, new fuel lines and petcock, the carb is still clean, and there's nothing clogging the fuel lines. I know the tune I have on it is good, because it's been stellar this whole week and ran without any issues. So with all that said, is there anything that y'all can think of that would potentially solve this predicament?



Thank ya!


 
Reply With Quote
Old 08-20-2020, 12:55 PM   #2
JerryHawk250   JerryHawk250 is offline
Moderator
 
JerryHawk250's Avatar
 
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,574
Possible bad coil or CDI. Check to see if it has spark right after it dies.
__________________
2023 Lifan Lycan 250 Chopper
2023 Venom Evader
2022 Lifan KPX250
2020 Kawasaki Vulcan S
2004 Honda ST 1300
2016 Black Hawk 250 (sold)
Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster
2016 Cazador180 XL
2014 Coolster150
JerryHawk250.com
My YouTube Channel


 
Reply With Quote
Old 08-20-2020, 01:11 PM   #3
veryrigged   veryrigged is offline
 
veryrigged's Avatar
 
Join Date: Aug 2020
Posts: 8
Just took a look at that, and it's maintaining a strong and steady spark. But I also learned something new, it will rev to a certain point then bog up, then stall. If I leave it alone, it will idle good until it stalls. I tried adjusting the air and idle screw, but that made no difference, the way I originally had it was working the best. I wouldn't have thought that I would need to change the jets, since It's been running strong using the current settings... but who knows? not me!


 
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:45 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.