Need a legitimate jet kit for 2020 brozz 250 please

Brozz250welder · 05-23-2020, 04:17 PM

Ordered a kit on Amazon it just arrived. $39.95 it included a 107.5 a 112.5 a 38 a few washers a wood screw and a drill bit. Pretty pissed the bike already has a 105 those are useless. Any suggestions or insite as to why I got a a countersunk wood screw? Also a link with a real assortment of jets. Amazon link? I would appreciate it. Thank you is the carb a keihin pe 30?

Brozz250welder · 05-23-2020, 04:28 PM

Name: 20200523_162410.jpg
Views: 426
Size: 96.3 KB

mtiberio · 05-23-2020, 05:06 PM

https://sites.google.com/site/motocheez/brozz-250

Baskt_Case · 05-23-2020, 06:47 PM

That kit looks like its for tuning a stock Hawk carb. Hawks come with tamper proof bowl screws, a rubber plug over the fuel screw, a needle without clip slots, and a weird pilot jet.

If you dont know what carb you have, we need a picture of both sides. Is it the carb that came with your bike? If its the factory carb, its definitely not a PE30. They are often a "sealed" PZ30 but you said you've already been inside the carb.

www.jetsrus.com can help you identify your jets

NzBrakelathes · 05-24-2020, 02:27 AM

That’s an expensive kit but looks right
1 pilot several main jets

Brozz250welder · 05-24-2020, 08:46 AM

Thanks guys. Yea I thought it was going to be a very complete and extensive kit. I dont know what carb,
The bike is arriving Tuesday. I just want to have something on hand to tune it if necessary.

KseKermit · 05-25-2020, 09:04 AM

Quote:

Originally Posted by Brozz250welder

Thanks guys. Yea I thought it was going to be a very complete and extensive kit. I dont know what carb,
The bike is arriving Tuesday. I just want to have something on hand to tune it if necessary.

Yep link mtiberio sent is what you need. I actually over drilled my main, got a piece of copper wire macgyvered in there to restrict flow until my kit comes in.

05-23-2020, 04:17 PM	#1
Brozz250welder Join Date: May 2020 Location: Ma Posts: 15	Need a legitimate jet kit for 2020 brozz 250 please Ordered a kit on Amazon it just arrived. $39.95 it included a 107.5 a 112.5 a 38 a few washers a wood screw and a drill bit. Pretty pissed the bike already has a 105 those are useless. Any suggestions or insite as to why I got a a countersunk wood screw? Also a link with a real assortment of jets. Amazon link? I would appreciate it. Thank you is the carb a keihin pe 30?
	0

05-23-2020, 05:06 PM	#3
mtiberio Join Date: Jun 2016 Location: Arlington, VA Posts: 258	https://sites.google.com/site/motocheez/brozz-250 __________________ 4 time WERA SuperVintage Roadracing National Champion, SCTA Land Speed Record Holder, 3rd AMA Motorcycle GP of Miami
	0

05-23-2020, 06:47 PM	#4
Baskt_Case Join Date: Sep 2019 Location: Springfield, KY Posts: 83	That kit looks like its for tuning a stock Hawk carb. Hawks come with tamper proof bowl screws, a rubber plug over the fuel screw, a needle without clip slots, and a weird pilot jet. If you dont know what carb you have, we need a picture of both sides. Is it the carb that came with your bike? If its the factory carb, its definitely not a PE30. They are often a "sealed" PZ30 but you said you've already been inside the carb. www.jetsrus.com can help you identify your jets __________________ 2018 Hawk - Nibbi PE30, Nibbi Intake, UNI Filter, Ebay Exhaust, NGK 4929 (non-Iridium), 428 D.I.D. X-Ring, 15/40 Sprockets, Walmart AGM Battery, IMS Shifter, Full LED Lighting, Digital Cluster, CSC Swingarm Pin, Modified Chain Adjusters, Upgraded Wheel Bearings MPH Cruise, MPG Last edited by Baskt_Case; 05-23-2020 at 08:39 PM.
	0

05-23-2020, 04:28 PM	#2
Brozz250welder Join Date: May 2020 Location: Ma Posts: 15
	0

05-24-2020, 02:27 AM	#5
NzBrakelathes Join Date: Jun 2016 Location: Hell Posts: 2,408	That’s an expensive kit but looks right 1 pilot several main jets
	0

05-24-2020, 08:46 AM	#6
Brozz250welder Join Date: May 2020 Location: Ma Posts: 15	Thanks guys. Yea I thought it was going to be a very complete and extensive kit. I dont know what carb, The bike is arriving Tuesday. I just want to have something on hand to tune it if necessary.
	0