Qlink XF200 carb info?

DrewsBrews · 06-02-2023, 08:27 PM

Looking to get my XF200 back on the road. I swapped mufflers and rejetted, but still had a hard time finding much other info on the carb itself back then, and it has been sitting for several years. Anyone know what model rebuild kit I need to look for?

At one point I scored an appropriately sized slide carb with accelerator pump.. but that is for another day. Need to get it in running order first.

culcune · 06-02-2023, 11:45 PM

Contact member 2LZ. He has a Qlink XP200 and has owned it for many, many years

DrewsBrews · 06-03-2023, 07:34 AM

Yeah from what I remember I thought it was based roughly on the DR200 but lower compression and a mishmash of the china parts bin otherwise. I thought it had a 28mm carb, but the DR had a 30mm or something. I recall the pipe seemed the same dia. as the dr125 when looking for muffler upgrades.

Thanks Jeffrey. I'll order a kit and see what fits.

Going to have to figure out the oil filter too. Don't remember if that was identical to the DR200 or not.

06-02-2023, 08:27 PM	#1
DrewsBrews Join Date: Jun 2023 Posts: 14	Qlink XF200 carb info? Looking to get my XF200 back on the road. I swapped mufflers and rejetted, but still had a hard time finding much other info on the carb itself back then, and it has been sitting for several years. Anyone know what model rebuild kit I need to look for? At one point I scored an appropriately sized slide carb with accelerator pump.. but that is for another day. Need to get it in running order first.
	0

06-02-2023, 11:45 PM	#2
culcune Join Date: May 2006 Location: Yuma, Arizona Posts: 9,035	Contact member 2LZ. He has a Qlink XP200 and has owned it for many, many years __________________ "They say that life's a carousel, spinning fast you got to ride it well..." TGB Delivery Scooter 150 TMEC 200 Enduro--carcass is sadly rotting in the backyard
	0

06-03-2023, 07:34 AM	#3
DrewsBrews Join Date: Jun 2023 Posts: 14	Yeah from what I remember I thought it was based roughly on the DR200 but lower compression and a mishmash of the china parts bin otherwise. I thought it had a 28mm carb, but the DR had a 30mm or something. I recall the pipe seemed the same dia. as the dr125 when looking for muffler upgrades. Thanks Jeffrey. I'll order a kit and see what fits. Going to have to figure out the oil filter too. Don't remember if that was identical to the DR200 or not.
	0