08-12-2020, 07:19 PM | #1 |
Join Date: Aug 2020
Posts: 14
|
New carburetor
Can anybody help me figure out how to put this on i just got in today and have no clue what goes where and what pieces I dont need if someone could help 9t would be greatly appreciated
|
|
08-12-2020, 07:47 PM | #2 |
Join Date: Aug 2009
Posts: 510
|
If you took the carb out of the box and it looks exactly like the picture above, you have to remove the intake manifold and flip it around 180°. The carb is upside-down in the pic above.
|
|
08-12-2020, 08:27 PM | #3 |
Join Date: Aug 2020
Posts: 14
|
Ok i have it like this so far but I do not know where all the houses are suspost to go
|
|
08-12-2020, 09:32 PM | #4 |
Join Date: May 2018
Posts: 1,581
|
Did the original carb not look very much the same ?the hoses go in pretty much the same locations .The one from the tank goes to the vertical nipple beside the pink hose in the picture you posted above ,and the other hose is the bowl drain which goes on the bottom of the carb .
|
|
08-12-2020, 10:23 PM | #5 |
Join Date: Aug 2020
Posts: 14
|
Here's another picture
|
|
08-12-2020, 10:31 PM | #6 |
Join Date: Aug 2020
Posts: 14
|
[QUOTE=Bruces;344392]Did the original carb not look very much the same ?the hoses go in pretty much the same locations .The one from the tank goes to the vertical nipple beside the pink hose in the picture you posted above ,and the other hose is the bowl drain which goes on the bottom of the carb
No they don't look nothing alike there were alot more hoses on the original carb. I put to gas hose next to the pink one that you mentioned and the drain one on the bottom thats just on clamp thats on the engine there kn the picture. But where does that pink hose go thats next to the gas? |
|
08-12-2020, 11:12 PM | #7 |
Join Date: May 2018
Posts: 1,581
|
It’s just a vent ,it doesn’t go anywhere ,just attach it like the original picture shows
|
|
08-13-2020, 02:25 PM | #8 |
Join Date: Aug 2020
Posts: 14
|
So the pink one is just a vent or should I hook up this hose to it. If not do you know where this hose is supposed to go
|
|
08-13-2020, 03:30 PM | #9 |
Join Date: May 2018
Posts: 1,581
|
That’s an emissions hose ,it should go straight into the garbage unless you need it to be legal where you live .
|
|
08-13-2020, 03:44 PM | #10 |
Join Date: Aug 2020
Posts: 14
|
Ok so just take the hose off all the way
|
|
08-13-2020, 03:53 PM | #11 |
Join Date: Aug 2020
Posts: 14
|
Or can I just zip tie it to the frame
|
|
08-13-2020, 04:20 PM | #12 |
Join Date: May 2018
Posts: 1,581
|
You can do what you wish with it ,I don’t see the point in riding around with extra junk on your bike that isn’t connected anymore ,but if you like it by all means zip tie it to the frame and once a year you can buy it a birthday cake or a dozen roses if you prefer .
|
|
08-13-2020, 04:24 PM | #13 |
Join Date: May 2018
Posts: 1,581
|
Looking at your pictures it appears you haven’t checked your valve clearances yet ,judging by the perfect paint on the valve cover caps ,you might want to figure that out next if you actually want to ride your bike with it running well .
|
|
08-13-2020, 05:05 PM | #14 |
Join Date: Aug 2020
Posts: 14
|
What do you mean by the valve clearance where is that at
|
|
08-13-2020, 07:03 PM | #15 |
Join Date: May 2018
Posts: 1,581
|
On your bike it’s actually in 2 places and probably at zero .You should be able to google valve clearance adjustment for a Honda z50 ,just do what it says and you will be fine .
|
|
|
|
|
|