Brozz 250 spare key

[AJboughtamoto]

I know you can order them but if you want to just walk into a local hardware store and buy one. Ask for an Ilco DC-3. It's an old Isuzu key. You will need to grind down the side to fit past the ignition plate. Other than that perfect fit.

[NzBrakelathes]

Prob a Honda key as well

[PeaceSportsAtlanta]

Originally Posted by AJboughtamoto

I know you can order them but if you want to just walk into a local hardware store and buy one. Ask for an Ilco DC-3. It's an old Isuzu key. You will need to grind down the side to fit past the ignition plate. Other than that perfect fit.

This is good info as we do not sell new keys. We sell complete locksets that come with two keys that match your new lock cylinders. While not expensive, it is a good bit more $ than just having another key cut locally.

[NzBrakelathes]

Originally Posted by PeaceSportsAtlanta

This is good info as we do not sell new keys. We sell complete locksets that come with two keys that match your new lock cylinders. While not expensive, it is a good bit more $ than just having another key cut locally.

The issue is the "gate" or cover over the lock - that is a key of sorts too.
Can be messed with but still.....

[AJboughtamoto]

Originally Posted by NzBrakelathes

The issue is the "gate" or cover over the lock - that is a key of sorts too.
Can be messed with but still.....

Arn't those generic though? I remember on Honda and Yamaha scooters in Thailand it was just built into the back of the key, they all looked just like the Brozz one does.