08-25-2017, 03:42 PM | #1 |
Join Date: Apr 2017
Posts: 147
|
smog blockoff plate for cg250 emissions plug
Where can I get a plate to cover the hole where the emissions control system comes off the cylinder head? Apparently it's a thing u can get for bikes but idk where to get one for a cg250 engine.
|
|
08-25-2017, 04:21 PM | #2 |
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,713
|
I don't think you will find one. Most on here just fabricate one out of steel or aluminum.
__________________
2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
|
08-25-2017, 08:27 PM | #5 |
Join Date: Apr 2017
Posts: 147
|
How far apart are the bolts on these? Would this work? http://www.ebay.com/itm/311298248082
It looks similar. I have a piece of hose with a bolt in one end that's hose clamped on to it but it looks like shit. I don't wanna jury rig it. |
|
08-25-2017, 09:09 PM | #6 |
Join Date: May 2017
Location: knoxville, tn
Posts: 25
|
Evap block off plate, from Cleveland Cycle werks.
$14.95 but not currently available. |
|
08-25-2017, 09:10 PM | #7 |
Join Date: Sep 2008
Location: central PA
Posts: 770
|
Block off plate.
That's alot of money for something you can make for free,,,,just trace the plate you took off including the bolt holes,, transfer that to a piece of metal. An cut it out .
__________________
2015 zongshen rx3,,(Sold),,,2016 bashan storm,,2005 Harley ultra classic. |
|
08-25-2017, 09:28 PM | #8 |
Join Date: Apr 2017
Posts: 147
|
Well I don't really have metal I can use lying around.
|
|
08-25-2017, 09:35 PM | #9 |
Join Date: Sep 2008
Location: central PA
Posts: 770
|
Block off plate
You only need a very small piece ,,guarantee if you trace it on to paper an show it to a garage or welding or machine shop ,,, they will probably give you a small scrap piece,,
__________________
2015 zongshen rx3,,(Sold),,,2016 bashan storm,,2005 Harley ultra classic. |
|
08-25-2017, 09:45 PM | #10 |
Join Date: Mar 2017
Location: Twin Cities MN
Posts: 525
|
Here is a link to what I used
https://smile.amazon.com/Dorman-Help-41050-Vacuum-Asst/dp/B000COB5TE/ref=pd_sbs_263_9?_encoding=UTF8&psc=1&refRID=WCBRB 3KNV68Q2SY08PVS I also took a tie wrap and used it to tighten it down a clamp would also work.
__________________
2016 Brozz Last edited by goat67; 08-26-2017 at 04:40 PM. |
|
09-26-2019, 04:03 PM | #11 |
Join Date: Mar 2019
Location: New Orleans, LA
Posts: 54
|
I know this is an old thread but I was searching for a plate too. I would suggest that if you use a vacuum cap you also shove some folded up/rolled up aluminum foil down into the "J-shaped" pipe before putting the cap on it. I would imagine hot exhaust will eventually melt or ruin the rubber...
|
|
09-26-2019, 04:22 PM | #12 |
Join Date: Jun 2018
Location: Pocatello, Idaho
Posts: 794
|
keep it all china syndrome!!!!! my mrs commandeered the steel off of our crate to build a project!!!
__________________
A family that works together, plays together, shoots and trains together, and sleds together, stays together. Second amendment! SkiDoo sleds, NOW 2 TTR225, and a BMS250. A couple of quotes (we are not farmers) "I don't get off the farm much" "Am too old school" I call the china bikes "the china syndrome". |
|
09-26-2019, 05:22 PM | #13 |
Join Date: Mar 2018
Location: Las Vegas, NV
Posts: 193
|
__________________
BaShan BSR 250 DB-41H 2018 Red BS250GY-18D JFG Racing Exhaust . Adjustable Shock 320mm . Brozz Digital Gauge . Renthal Fat Bar . 428 17x46 Sprocket . Fender Eliminator . Wheel Truing . Fuel Tank Repair . Keihin PZ30 Main-115 Pilot-38 Needle-1Washer Fuel Mixture-1/2 BSR Chronicles - "Project leads to more projects!" Yamaha WR250R Suzuki GSX-R 600 |
|
09-26-2019, 07:45 PM | #14 |
Join Date: Sep 2019
Location: Maine
Posts: 98
|
Just curious what the advantage is to removing the whole assembly and blocking it off? Does it hurt anything to keep it connected?
|
|
09-26-2019, 09:32 PM | #15 |
Join Date: Apr 2017
Location: Omaha, NE
Posts: 8,110
|
Its worth removing if you change the exhaust or decat the factory system. Unless you like hearing pops, bangs, and spitting flames and burning out any muffler packing hou might have.
__________________
Hawk Information and Resource guide: http://www.chinariders.net/showthread.php?t=20331 2018 Hawk 250 - Full Mod list here. http://www.chinariders.net/showpost....62&postcount=1 2024 Royal Enfield Shotgun 650 https://chinariders.net/showthread.php?t=34124 |
|
|
|
|
|