Spacer for front wheel

MotoJoJo · 08-31-2019, 09:07 PM

Bought my 2017 hawk second hand and it seems to be missing a spacer in the front axle. Either missed in the original assembly or not shipped with the bike. If the axle is tightened the disc rubs. If it's loosened to where the wheel spins properly it's not tight at all. Anyone know where I can find only the spacer without buying a new wheel assembly? Or one sold for a different bike that's the same size? Perhaps a Honda?

NzBrakelathes · 08-31-2019, 11:32 PM

Old version Bashan.
www.brozz250.com
you can see the banner above as they sponser

MotoJoJo · 09-01-2019, 07:11 PM

That's lovely it's called the shaft sleeve, on a related note do you know If the rear cargo rack matches bolts with the hawk?

NzBrakelathes · 09-02-2019, 07:49 AM

Quote:

Originally Posted by MotoJoJo

That's lovely it's called the shaft sleeve, on a related note do you know If the rear cargo rack matches bolts with the hawk?

I have the rear cargo rack - 3 sizes!
From $30 to $40 posted to the USA

Or if you want to use Ebay its more expensive and only the mid size listed

franque · 09-02-2019, 09:50 AM

Try switching which side the spacers are on, assuming it still has two? Sometimes they get mixed up.

NzBrakelathes · 09-02-2019, 11:27 PM

Quote:

Originally Posted by MotoJoJo

That's lovely it's called the shaft sleeve, on a related note do you know If the rear cargo rack matches bolts with the hawk?

Here’s a clear vid showing the Bross rack etc
Answers your question?

MotoJoJo · 09-04-2019, 11:53 AM

It seems to only have one. The sites that sell the full wheel assembly only showed one

**JerryHawk250** · 09-04-2019, 11:56 AM

Should have one spacer on the rotor side.

franque · 09-04-2019, 02:30 PM

I'd give RPS a call, and either have a local machinist turn one up (if you can get specs from them), or just order one from there.

NzBrakelathes · 09-04-2019, 07:30 PM

Quote:

Originally Posted by franque

I'd give RPS a call, and either have a local machinist turn one up (if you can get specs from them), or just order one from there.

Peace sports in Atlanta I would say has what you need

08-31-2019, 09:07 PM	#1
MotoJoJo Join Date: Jul 2019 Location: West Virginia Posts: 5	Spacer for front wheel Bought my 2017 hawk second hand and it seems to be missing a spacer in the front axle. Either missed in the original assembly or not shipped with the bike. If the axle is tightened the disc rubs. If it's loosened to where the wheel spins properly it's not tight at all. Anyone know where I can find only the spacer without buying a new wheel assembly? Or one sold for a different bike that's the same size? Perhaps a Honda?
	0

09-01-2019, 07:11 PM	#3
MotoJoJo Join Date: Jul 2019 Location: West Virginia Posts: 5	Thanks That's lovely it's called the shaft sleeve, on a related note do you know If the rear cargo rack matches bolts with the hawk?
	0

09-04-2019, 11:56 AM	#8
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,571	Should have one spacer on the rotor side. __________________ 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	1

08-31-2019, 11:32 PM	#2
NzBrakelathes Join Date: Jun 2016 Location: Hell Posts: 2,408	Old version Bashan. www.brozz250.com you can see the banner above as they sponser
	1

09-02-2019, 09:50 AM	#5
franque Join Date: Nov 2017 Location: Marseille, France -> Conakry, Guinea Posts: 1,481	Try switching which side the spacers are on, assuming it still has two? Sometimes they get mixed up.
	0

09-04-2019, 11:53 AM	#7
MotoJoJo Join Date: Jul 2019 Location: West Virginia Posts: 5	It seems to only have one. The sites that sell the full wheel assembly only showed one
	0

09-04-2019, 02:30 PM	#9
franque Join Date: Nov 2017 Location: Marseille, France -> Conakry, Guinea Posts: 1,481	I'd give RPS a call, and either have a local machinist turn one up (if you can get specs from them), or just order one from there.
	0