Hello! New rider here, tell me if i have a honda or yamaha clone !

[Dionili]

Hello everyone!

I'm a new rider, and am loving my zongshen (bought it used for 800$ tons of problems but slowly fixing them)

So my one issue is that i have no idea if my bike is a honda or yamaha clone and i need to know ASAP as tomorrow i need to buy a gasket kit so i can rebuild my clutch

before the pastidip:



after:




After the quadbarrel 15k lumen LED headlight was installed:


and with the starter button mod cause we all know that yellow one sucks:


and the port for my battery eXtender:
https://www.dropbox.com/s/mtymh0xzbv...08.21.jpg?dl=0


Mods I'm Doing tomorrow:
Cigerett lighter plug mod, keep your devices charged
Thats about it unless you guys have some suggestions and i'm totally open ) LOVE TO MOD!!!!

Also i ordered this clutch kit hoping its the right one will anyone verify?
http://www.ebay.com/itm/171090214836...%3AMEBIDX%3AIT

and will this carb work as well?
http://www.ebay.com/itm/331328388127...%3AMEBIDX%3AIT

Thanks for all the help and advice!
Dio

[Dionili]

https://www.dropbox.com/s/mtymh0xzbv...08.21.jpg?dl=0
https://www.dropbox.com/s/euqquceua7...07.58.jpg?dl=0
https://www.dropbox.com/s/ow9yemddou...39.43.jpg?dl=0
https://www.dropbox.com/s/dkeuh3rvd2...57.29.jpg?dl=0
https://www.dropbox.com/s/9jwpubhqg4...57.18.jpg?dl=0

sorry about the pics seems as though the forum does not like dropbox

[Mudflap]

The engine is a Honda clone but without seeing the left side of the engine I can't tell which one it is.

[Dionili]

Originally Posted by Mudflap

The engine is a Honda clone but without seeing the left side of the engine I can't tell which one it is.

give me a few mins, just let my buddy ride out to the store on her when hes back i'll get a pick of the left side for you and thanks!

[humanbeing]

Originally Posted by Mudflap

...I can't tell which one it is.

16?FML stamped on engine tells it's a 198 (69/ Zongshen) http://item.taobao.com/item.htm?id=36744024764 or 196 (63.5/ direct clone) http://item.taobao.com/item.htm?id=39517848641

[Dionili]

Originally Posted by humanbeing

16?FML stamped on engine tells it's a 198 (69/ Zongshen) http://item.taobao.com/item.htm?id=36744024764 or 196 (63.5/ direct clone) http://item.taobao.com/item.htm?id=39517848641

uhhh so can i get a gasket kit from honda? if so what kit?

and will the parts i ordered fit?

[Dionili]

Originally Posted by Dionili

uhhh so can i get a gasket kit from honda? if so what kit?

and will the parts i ordered fit?

Left side: https://www.dropbox.com/s/ndz7n5owo5...18.02.jpg?dl=0

[humanbeing]

Gasket http://www.bikechatforums.com/viewtopic.php?p=2873315
---
Someone from US also adopted that method (CA250 NEVER imported to US):
http://www.mychinamoto.com/forums/sh...ll=1#post68577

[SpudRider]

You're off to a very good start.

[Dionili]

Originally Posted by SpudRider

You're off to a very good start.

you think so spud? thanks that means alot from ya, considering i bought my bike based on your posts lol

I'm young guys this is y first bike, any advice you guys give me is appreciated

back to gaskets...halp....do i cut one out of a cera box? or buy a gasket set from honda?

[SpudRider]

I'm glad my posts helped you to decide to purchase a Chinese motorcycle.

My Zongshen ZS200GY-2 has a copy of a Yamaha engine, so I will defer to the Honda experts regarding the choice of a gasket set.

[Dionili]

Originally Posted by SpudRider

I'm glad my posts helped you to decide to purchase a Chinese motorcycle.

My Zongshen ZS200GY-2 has a copy of a Yamaha engine, so I will defer to the Honda experts regarding the choice of a gasket set.

Hmmm so any suggestions For a gasket kit?

Weird morning, I wake up head outside hop on my bike getting ready to see my probation officer , the damn thing wouldn't start, battery died some how (I did how ever take it off the tender last night but the battery was 95% before I parked and my head light only comes on when the keys in the ignition any ideas on to what drained my battery?

On a side note, after a ton of kicking she started up I was pulling into the probation office hit a curb and pretty much went sailing in front of my po, full superman air right into the floor lmao shoulda seen her face

P.s. Before you all ask I used to have a couple grow rooms down here before my parner ratted me out . (I'm also in the last weeks of my probation I'm planning a road trip to celebrate my freedom soon, yall wanna join be my guest I will be going from Miami to Vagas on the 16th)

[Adjuster]

LOL thats quite the story. Stay out of trouble and stay on the bike is the only advice I can give you.


/

[Mudflap]

It's the OHC version of the Honda engine. If you're careful you probably won't need to replace the side cover gasket to rebuild the clutch but it's probably the same gasket as the more common OHV engine.

My sympathies for having to deal with the parole officer for growing a little weed. Growing your own will be legal here in Oregon in 29 days, 12 hours, and 41 minutes.....

[Dionili]

Originally Posted by Mudflap

It's the OHC version of the Honda engine. If you're careful you probably won't need to replace the side cover gasket to rebuild the clutch but it's probably the same gasket as the more common OHV engine.

My sympathies for having to deal with the parole officer for growing a little weed. Growing your own will be legal here in Oregon in 29 days, 12 hours, and 41 minutes.....

i had 140 paitents XD avoided trafficing by only taking payment in grow gear or shit that i needed


i'm probably going to build another grow op the second i'm off probo in a legal state XD


SO My bike runs like crap, but i knew that buying it, seems that the clutch dont lift all the way, it bogs, misfires and backfires and i know she aint going over 45 ish as it is. but i got clutch rebuild kit and a p27 carburator coming that should be all it needs to run right, right?