What is this exhaust bracket called?

Ten41 · 10-27-2021, 07:23 PM

One of the boys forgot to tighten his bracket down as I told him too, and it ended up falling off. But I cannot figure out what in the world the thing is called in order for a new one to be ordered.

It is the bracket that holds (what I call) the exhaust header and the exhaust.

Name: Bracket Small 2.jpg
Views: 326
Size: 178.1 KB

Name: Bracket Small 2.jpg
Views: 326
Size: 178.1 KB

**JerryHawk250** · 10-27-2021, 07:49 PM

It's a sanitary clamp. I don't remember the exact size but can be found on Amazon.

Ten41 · 10-27-2021, 08:20 PM

Wow. That almost doesn't seem right, nomenclature wise.

Thanks!

China Rider 27 · 10-27-2021, 10:25 PM

I saw post few years ago JerryHawk250 said he safety wired his and I promptly did the same. No problems since.

mototech77 · 10-28-2021, 08:48 PM

That is a funky name of a part to see on a motorcycle

. I thought it was a v-band clamp at first glance.

**JerryHawk250** · 10-29-2021, 08:15 AM

I don't remember the exact size. You will have to take some measurements. Here's a link. https://www.amazon.com/QiiMii-Stainl...2s9dHJ1ZQ&th=1

david3921 · 10-29-2021, 10:51 PM

I was curious so I looked up what they are designed for;

Sanitary clamps and hangers are for use with stainless steel piping systems in a food, beverage, and biopharmaceutical applications.

buzz · 10-30-2021, 07:27 AM

not a muffler clamp for sure

Ten41 · 11-01-2021, 03:59 PM

Quote:

Originally Posted by JerryHawk250

I don't remember the exact size. You will have to take some measurements. Here's a link...

Thanks Jerry Hawk! That is the exact one we purchased. It was good for him to actually use his mathematics to go from the circumference of the pipe to the diameter. Finally something that he cares about uses the math that he was required to learn.

We received it rather quickly and it did the job perfectly. No more exhaust rattle or exhaust gas bypass to heat up his leg.

**JerryHawk250** · 11-01-2021, 04:11 PM

Quote:

Originally Posted by Ten41

Thanks Jerry Hawk! That is the exact one we purchased. It was good for him to actually use his mathematics to go from the circumference of the pipe to the diameter. Finally something that he cares about uses the math that he was required to learn.

We received it rather quickly and it did the job perfectly. No more exhaust rattle or exhaust gas bypass to heat up his leg.

Put a safety wire on it and it will never come off again. Mine kept vibrating loose but was lucky it never feel of. After putting the safety wire it never got loose again.

Ten41 · 11-01-2021, 06:56 PM

Will do thanks!

Magician16 · 11-02-2021, 08:13 AM

Those things do have a tendency to fall off. I lost mine sometime in the first 100 miles, but I knew about where it fell off. I searched about 10 minutes before I found it.

10-27-2021, 07:23 PM	#1
Ten41 Join Date: Sep 2021 Posts: 24	What is this exhaust bracket called? One of the boys forgot to tighten his bracket down as I told him too, and it ended up falling off. But I cannot figure out what in the world the thing is called in order for a new one to be ordered. It is the bracket that holds (what I call) the exhaust header and the exhaust.
	0

10-27-2021, 07:49 PM	#2
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,561	It's a sanitary clamp. I don't remember the exact size but can be found on Amazon. __________________ 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	0

10-28-2021, 08:48 PM	#5
mototech77 Join Date: May 2021 Location: Central Florida Posts: 80	That is a funky name of a part to see on a motorcycle . I thought it was a v-band clamp at first glance. __________________ 2021 Lifan Xpect EFI 2012 DF250rtc 1982 Yamaha Virago XV750 1982 Honda Twinstar CM200
	0

10-29-2021, 08:15 AM	#6
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,561	I don't remember the exact size. You will have to take some measurements. Here's a link. https://www.amazon.com/QiiMii-Stainl...2s9dHJ1ZQ&th=1 __________________ 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	0

10-29-2021, 10:51 PM	#7
david3921 Join Date: Feb 2009 Location: Michigan Posts: 1,031	I was curious so I looked up what they are designed for; Sanitary clamps and hangers are for use with stainless steel piping systems in a food, beverage, and biopharmaceutical applications. __________________ 2012 Kawasaki Versys 1984 Honda Magna V65 2016 Rhino 250 2016 Tao Tao 125D
	0

10-27-2021, 08:20 PM	#3
Ten41 Join Date: Sep 2021 Posts: 24	Wow. That almost doesn't seem right, nomenclature wise. Thanks!
	1

10-27-2021, 10:25 PM	#4
China Rider 27 Join Date: Dec 2018 Location: PNW Posts: 982	I saw post few years ago JerryHawk250 said he safety wired his and I promptly did the same. No problems since.
	1

10-30-2021, 07:27 AM	#8
buzz Join Date: Dec 2020 Location: Dayton Pa. Posts: 862	not a muffler clamp for sure
	0

11-01-2021, 06:56 PM	#11
Ten41 Join Date: Sep 2021 Posts: 24	Will do thanks!
	0

11-02-2021, 08:13 AM	#12
Magician16 Join Date: Aug 2019 Posts: 468	Those things do have a tendency to fall off. I lost mine sometime in the first 100 miles, but I knew about where it fell off. I searched about 10 minutes before I found it. __________________ 2018 Bashan Storm(sold) 2016 Magician 250
	0