hawk signal beep disconnect ???

snobnd16 · 07-28-2016, 06:36 PM

Assembled my new Hawk today and I have never owned a bike with a back up alarm for the turn signals .How can I disconnect it ? I disconnected the flasher under the seat ( I assume the flasher ) and turn signals would not work .

Azhule · 07-28-2016, 06:38 PM

snobnd16 · 07-28-2016, 06:44 PM

Sweet !!! Thanks !!!

LunaTech · 07-28-2016, 06:53 PM

Check out all the other videos MotoCheez has made (the guy who made that video). He has a lot of info and mods for our Hawks.

pcspecialist · 07-28-2016, 07:27 PM

just tape over it and then make whatever size opening is necessary for the desired volume, or, no opening at all.

snobnd16 · 07-28-2016, 07:49 PM

Quote:

Originally Posted by LunaTech

Check out all the other videos MotoCheez has made (the guy who made that video). He has a lot of info and mods for our Hawks.

I have watched most Motocheez videos . He is the man !

snobnd16 · 07-28-2016, 07:52 PM

I have another question ? The air intake tube is kinked from the air box and the carb . I would like to install an Uni-Filter , but unsure as to which one to buy ?

snobnd16 · 07-28-2016, 08:12 PM

Quote:

Originally Posted by pcspecialist

just tape over it and then make whatever size opening is necessary for the desired volume, or, no opening at all.

HAHA Too funny ! I would have done that , but umm ... no opening to tape over . Az sent a link for Motocheez and that fixed the problem

hertz9753 · 07-28-2016, 09:06 PM

http://www.chinariders.net/search.php?searchid=419094

You are #4 to ask that question. You turn that thing on outside of a loading dock and the door will come up.

07-28-2016, 06:36 PM	#1
snobnd16 Join Date: Jul 2016 Location: Alabama (Gulf Coast) Posts: 32	hawk signal beep disconnect ??? Assembled my new Hawk today and I have never owned a bike with a back up alarm for the turn signals .How can I disconnect it ? I disconnected the flasher under the seat ( I assume the flasher ) and turn signals would not work .
	0

07-28-2016, 06:38 PM	#2
Azhule Join Date: Dec 2015 Location: CO Posts: 1,525	__________________ "Think as you like... but this self proclaimed Professor is always right" - Buckshot "You never know what someone is hiding beneath their smile..." - NinjaTom - R.I.P.
	0

07-28-2016, 09:06 PM	#9
hertz9753 Join Date: May 2016 Location: Bismarck, ND Posts: 868	http://www.chinariders.net/search.php?searchid=419094 You are #4 to ask that question. You turn that thing on outside of a loading dock and the door will come up. __________________ 2015 and 3/4 RPS Hawk 250. Most people would call it a 2016 but the MCO didn't.
	0

07-28-2016, 06:44 PM	#3
snobnd16 Join Date: Jul 2016 Location: Alabama (Gulf Coast) Posts: 32	Sweet !!! Thanks !!!
	0

07-28-2016, 06:53 PM	#4
LunaTech Join Date: Jul 2016 Location: Jonesville, NC Posts: 136	Check out all the other videos MotoCheez has made (the guy who made that video). He has a lot of info and mods for our Hawks.
	0

07-28-2016, 07:27 PM	#5
pcspecialist Join Date: May 2016 Posts: 583	just tape over it and then make whatever size opening is necessary for the desired volume, or, no opening at all.
	0

07-28-2016, 07:52 PM	#7
snobnd16 Join Date: Jul 2016 Location: Alabama (Gulf Coast) Posts: 32	I have another question ? The air intake tube is kinked from the air box and the carb . I would like to install an Uni-Filter , but unsure as to which one to buy ?
	0