Go Back   ChinaRiders Forums > Technical/Performance > Street
Register FAQ Community Calendar Today's Posts Search
Reply
 
Thread Tools Search this Thread Display Modes
Old 03-18-2007, 02:13 PM   #1
SinnerDC2   SinnerDC2 is offline
 
Join Date: Mar 2007
Posts: 62
How much chain slack on a street bike? How to measure slack?

I found this topic but it doesnt say how much slack to have?

http://www.chinariders.net/modules.p...ighlight=slack


Also How do I measure slack in a chain?

Thanks,
Nick


 
Reply With Quote
Old 03-19-2007, 05:40 AM   #2
Ferrit   Ferrit is offline
 
Join Date: Nov 2006
Location: Lawrenceburg, KY
Posts: 178
The best way that I've found to measure the slack in a chain is to compress the rear shock until the swingarm is parallel to the ground. This is the tightest that the chain can be. You should adjust for about a half inch of slack, measured at the halfway point between the axle and the swingarm pivot.

A couple of methods for compressing the shock--Use a ratchet strap across the seat and cinch it down until the swingarm is level. Or lay across the seat, using your best circus balancing act! I prefer the former but end up using the later most often.

Also, once you have adjusted it correctly, check it with the bike sitting normally at rest. Then you will have a good idea of the slack so that when you walk out to the bike you can use your toe to tug up on it and get a pretty good idea if it has loosened any.

Hope that helps ya,
G.


 
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:04 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.