Fender elimination completed

bsskibum · 10-04-2013, 11:00 PM

simply cut it off flush and added a 90 degree license plate mount..
then a couple small blinkers...

On the left is a beat to hell zongshen that was at bob's used cycle shop when I rolled in today...
It had hardly any plastics left and was sputtering pretty bad.. I gave him the link to the site and told him to start asking questions and searching...

FastDoc · 10-04-2013, 11:19 PM

I hope that Zong owner finds us!

Your bike looks great, I'm glad you are enjoying it.

bsskibum · 10-04-2013, 11:44 PM

you can barely notice but I have debadged her
I am leaving the zongshen on the tank(cant locate the sameas a sticker to purchase?
so i will remove the dip that goes over it before the final glossifier coat
(then it will have a cool 'sunk in look')

I am in process of prepping for plasti-dipping her
sanding her down was necessary since they clear coated the bike right over the stickers causing ridges when the stickers where removed...

the look of the color on a bike..
dipped over black(greatly affects hue to have a dark color under it
http://www.kawasakininja300.com/foru...ip-work-8.html

https://www.dipyourcar.com/plasti-di...green-can.html
the final shiney coat... https://www.dipyourcar.com/Glossifier.html

SpudRider · 10-05-2013, 01:02 PM

You did a nice job eliminating the fender.

Weldangrind · 10-06-2013, 12:03 PM

That's awesome that you happened upon somebody with the same bike! I hope he joins us.

Your fender elimination is exactly what I thought those bikes needed. It looks good.

10-04-2013, 11:00 PM	#1
bsskibum Join Date: May 2013 Location: phoenix arizona Posts: 68	Fender elimination completed simply cut it off flush and added a 90 degree license plate mount.. then a couple small blinkers... On the left is a beat to hell zongshen that was at bob's used cycle shop when I rolled in today... It had hardly any plastics left and was sputtering pretty bad.. I gave him the link to the site and told him to start asking questions and searching...
	0

10-04-2013, 11:19 PM	#2
FastDoc Join Date: Mar 2009 Location: Southeastern Washington desert Posts: 14,761	I hope that Zong owner finds us! Your bike looks great, I'm glad you are enjoying it. __________________ Happy to serve.
	0

10-05-2013, 01:02 PM	#4
SpudRider Join Date: Jul 2008 Location: Idaho Posts: 25,054	You did a nice job eliminating the fender. __________________ Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894
	0

10-06-2013, 12:03 PM	#5
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	That's awesome that you happened upon somebody with the same bike! I hope he joins us. Your fender elimination is exactly what I thought those bikes needed. It looks good. __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

10-04-2013, 11:44 PM	#3
bsskibum Join Date: May 2013 Location: phoenix arizona Posts: 68	you can barely notice but I have debadged her I am leaving the zongshen on the tank(cant locate the sameas a sticker to purchase? so i will remove the dip that goes over it before the final glossifier coat (then it will have a cool 'sunk in look') I am in process of prepping for plasti-dipping her sanding her down was necessary since they clear coated the bike right over the stickers causing ridges when the stickers where removed... the look of the color on a bike.. dipped over black(greatly affects hue to have a dark color under it http://www.kawasakininja300.com/foru...ip-work-8.html https://www.dipyourcar.com/plasti-di...green-can.html the final shiney coat... https://www.dipyourcar.com/Glossifier.html
	0