Answer for pilot jet on stock carburetor

elevatorman · 06-19-2017, 07:39 PM

While watching a video from Action Motorsports LLC, I've finally seen a method of dealing with the OEM strange jet on the Sheng Wey carburetor.
The video is about modifications to a Cleveland CycleWerks Heist which has the same carb as a Hawk.
When installing custom exhaust the carb was disassembled and rejetted.
The main jet was a straight forward swap however for the pilot jet they simply used a tap to thread and install a more conventional pilot jet.
If interested look on youtube actionmotorsportsllc. for heist modification

humanbeing · 06-20-2017, 09:17 AM

Quote:

Originally Posted by elevatorman

While watching a video from Action Motorsports LLC, I've finally seen a method of dealing with the OEM strange jet on the Sheng Wey carburetor...
... however for the pilot jet they simply used a tap to thread and install a more conventional pilot jet...

Those Keihin pilot jet's thread is 6*0.75mm
~04:28

pcspecialist · 06-20-2017, 11:12 PM

wow, too easy

pcspecialist · 06-20-2017, 11:22 PM

well, not so easy...... I don't have 6x.75mm, I have 6x1mm. $6 dollars from China is the lowest price I can find so I won't be playing around with it unless my Mikuni goes bad.

06-19-2017, 07:39 PM	#1
elevatorman Join Date: May 2017 Location: knoxville, tn Posts: 25	Answer for pilot jet on stock carburetor While watching a video from Action Motorsports LLC, I've finally seen a method of dealing with the OEM strange jet on the Sheng Wey carburetor. The video is about modifications to a Cleveland CycleWerks Heist which has the same carb as a Hawk. When installing custom exhaust the carb was disassembled and rejetted. The main jet was a straight forward swap however for the pilot jet they simply used a tap to thread and install a more conventional pilot jet. If interested look on youtube actionmotorsportsllc. for heist modification
	0

06-20-2017, 11:12 PM	#3
pcspecialist Join Date: May 2016 Posts: 583	wow, too easy
	0

06-20-2017, 11:22 PM	#4
pcspecialist Join Date: May 2016 Posts: 583	well, not so easy...... I don't have 6x.75mm, I have 6x1mm. $6 dollars from China is the lowest price I can find so I won't be playing around with it unless my Mikuni goes bad.
	0