Go Back   ChinaRiders Forums > Technical/Performance > Street
Register FAQ Community Calendar Today's Posts Search
Reply
 
Thread Tools Search this Thread Display Modes
Old 03-21-2024, 07:33 PM   #1
Phane   Phane is offline
 
Join Date: Jan 2024
Posts: 20
Resetting the ECU

Have anyone of you had to reset the ECU: this is the method described:
To reset motorcycle ecu, you can follow these steps:
Turn off the engine and the ignition switch, and unplug the ecu from your bike.
Remove the negative and positive wires from the battery terminal and leave it for 10-15 minutes.
Plug the ecu back to your bike, reconnect the battery wires, and turn on the ignition switch.
Start the engine and let it idle for a few minutes.


I was wondering would this cause any problems on my KPR 200


 
Reply With Quote
Old 03-21-2024, 11:15 PM   #2
krat   krat is offline
 
Join Date: Nov 2019
Location: KY
Posts: 277
No more than replacing the old ECU unit with a new one!
__________________
%90 of the Chinese motorbikes ever made are still on the road. The other %10 made it back home.


 
Reply With Quote
Old 03-21-2024, 11:59 PM   #3
Phane   Phane is offline
 
Join Date: Jan 2024
Posts: 20
Turns out that all I needed to do was adjust my valve clearances and not bother the ecu or air gulp screw!


 
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:57 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.