|
12-19-2010, 03:48 PM | #1 |
Join Date: Jun 2010
Posts: 10
|
re jetting?
I have my hensim 250 pheonix tore down and put new exhaust on it but now i need to re-jet the carbs i think. any idea where to look for jets and what size i should start with? it is strait pipes no baffles so it needs to get more fuel i assume. thanks in advanced for the help.
|
|
12-19-2010, 04:04 PM | #2 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
Do you have two carbs on it? What size are the jets now?
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
12-19-2010, 04:09 PM | #3 |
Join Date: Jun 2010
Posts: 10
|
single carb, not sure what size the stock jets are in it. where could i find that?
|
|
12-19-2010, 04:12 PM | #4 |
Join Date: Mar 2009
Location: Southeastern Washington desert
Posts: 14,761
|
Best bet would be to look at the old jet. You may need a magnifying glass to see the numbers if your eyes are like mine. :wink:
You might be able to tell by seeing what the stock jet is in a Rebel 250, but I could not promise it would be the same.
__________________
Happy to serve. |
|
12-19-2010, 09:23 PM | #5 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
I took some pics when I swapped jets on a Chinese atv, but it's all the same. Check out page four: http://www.chinariders.net/modules.p...r=asc&start=45
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
|
|
|
|