|
![]() |
#1 |
Join Date: Apr 2009
Posts: 330
|
Atv Engine Side Cover Came Off
Well. I was riding my atv and the side cover of my atv engine came off. Here is a picture.
![]() |
![]() |
![]() |
#2 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
I'm guessing that you found it and re-installed it. Am I right?
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
![]() |
![]() |
#3 |
Join Date: Sep 2008
Location: Surrey, B.C., Canada
Posts: 2,185
|
I'm missing something too???
...and why are the fenders blue? |
![]() |
![]() |
#4 |
Join Date: Apr 2009
Posts: 330
|
I did not find the side cover. I was looking for it but never found it. My fenders are not blue. I just took a photo from giobikes.com. Turbo T your missing the engine side cover one too. If I was to take a photo it would never look as clean as that since my atv is always covered in mud. :P
|
![]() |
![]() |
#5 |
Join Date: Sep 2008
Location: Surrey, B.C., Canada
Posts: 2,185
|
I'm still confused?? 8O
|
![]() |
![]() |
#6 |
Join Date: Apr 2009
Posts: 330
|
I'll post a pic turbo T.
|
![]() |
![]() |
#7 |
Join Date: Jun 2009
Location: Onatrio Canada
Posts: 28
|
whats the cover for ? i see on my atv has the same was always thinkin it was just like a peace for looks have never tryed to take it off is there a hole under it or something ?
|
![]() |
![]() |
#8 |
Join Date: Apr 2009
Posts: 330
|
Yea. there is a hole. I don't know what is it for but I took some pictures.
![]() ![]() |
![]() |
![]() |
#9 |
Join Date: Sep 2008
Location: Surrey, B.C., Canada
Posts: 2,185
|
Strange. Wonder how it fell off.
|
![]() |
![]() |
#10 |
Join Date: Apr 2009
Posts: 330
|
I don't know how it really fell of. It fell off when I was riding it.
|
![]() |
![]() |
#11 |
Join Date: Jun 2009
Location: orbital platform
Posts: 741
|
If I remember correctly (it's been quite a while, like 40+ years) since i owned a Honda 50, the cover you are referring to is threaded into the side cover, (so I would assume it just un-threaded itself and fell out) underneath the cover (which is missing) you see a set screw with a lock nut, this is used to set the auto-clutch. Now, as to that setting, I simply don't remember, but I would assume, too tight (screwed in) and the clutch won't disengage, too loose (screwed out) and the clutch will slip. I'm sure there is a "proper" setting of some type, but, at least here, it is lost in the fog of passing time.
|
![]() |
![]() |
#12 |
Join Date: Apr 2009
Posts: 330
|
Oooooo, so I am missing the screw and the cover. Shit. Where am I supposed to get it from?
|
![]() |
![]() |
#13 |
Join Date: Apr 2009
Posts: 330
|
Maybe Turbo T, can you take your engine side cap off to see if it has a bolt in it.
|
![]() |
![]() |
#14 |
Join Date: Sep 2008
Location: Surrey, B.C., Canada
Posts: 2,185
|
From the fuzzy picture it looks like you may have a bolt in there still. It would only be the cap that fell off. I can't imagine any hardware inside that cover would have come loose. Shine a flashlight in there on yours and see what you see. I doub't it's a gaping hole into the motor, or you'd be spilling oil.
I need to do an oil change on mine this weekend and will have a look if there is still a question in your mind. |
![]() |
![]() |
#15 |
Join Date: Apr 2009
Posts: 330
|
I'll check tommorrow when it is more sunny outside. Where can I buy a cover from.
|
![]() |
|
![]() |
![]() |
|
|