|
03-22-2024, 09:44 AM | #1 |
Join Date: Feb 2024
Posts: 20
|
Bashan 250s b11 starting problem
Got a bashan 250cc it's had a new battery, new starter motor, new starter clutch and flywheel and still turns over like the battery is dead.
Any ideas what is causing this? Any help would be appreciated Thanks |
|
03-22-2024, 09:52 AM | #2 |
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,713
|
Check that all your battery connection are clean and tight. This includes ground to frame and connections to starter relay.
__________________
2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
|
03-22-2024, 10:09 AM | #3 | |
Join Date: Feb 2024
Posts: 20
|
Quote:
Thanks will check all connections and clean and see if that helps. Also I bought a new starter clutch it came with the flywheel included, Do I need a 2 way starter clutch if the quad has reverse? This is the one I bought https://www.ebay.co.uk/itm/374916202...mis&media=COPY |
|
|
03-22-2024, 11:53 AM | #4 | |
Join Date: Feb 2024
Posts: 20
|
Quote:
Just cleaned all the terminals, ground wire etc and it's still the same, it's like something is taking all the power from the battery before it's getting to the starter motor and then it's not enough juice to start it |
|
|
03-22-2024, 12:18 PM | #5 |
Join Date: May 2021
Posts: 358
|
You say it’s had a new battery, what does that mean? If it has a new battery and it is a wet cell is the electrolyte level correct and has it been fully charged? Just a bit confused…thinking out loud
|
|
03-22-2024, 01:04 PM | #6 |
Join Date: Feb 2024
Posts: 20
|
It means it's a brand new battery fully charged I've tried it on my other quads so I no its not the battery
|
|
03-22-2024, 01:24 PM | #7 |
Join Date: May 2021
Posts: 358
|
That leads me to believe that your starter is the problem. There was talk here I believe last year about how starters had bad wiring. I would put my hand on the starter while cranking and see if it gets warm or hot quickly. I can’t remember who it was but they showed pictures of the wiring on these cheap starters.
|
|
|
|
|
|