11-05-2016, 09:56 PM
|
#11
|
Join Date: Jun 2016
Location: Colorado
Posts: 1,107
|
Quote:
Originally Posted by Weldangrind
I suspect you'll find a pilot mixture screw on the underside of the carb, right where it meets the intake tube. If you feel the bowl, you'll note that there is a relief that accommodates the screw. It is a bear to get at.
That said, it isn't likely to resolve your issue. As Jerry pointed out, you need a bigger main jet. When it comes to swapping jets, I prefer to also swap to a Mikuni, since finding jets is much easier and cheaper. A new Mikuni can be had for less than $40 shipped.
To respond to your other question, moving the clip will affect mid-range, not WOT.
|
Thanks for the advice. Its time to buy a new carb. I will wait to re jet it until I get my new muffler.
|
|
|