If your Vader ignition button doesn't work - check this!

prismways · 04-23-2017, 09:40 PM

So I was strapping in all the hoses and loose wires on my bike and when I went to start it after everything was closed up, I noticed my electric start would not do anything. No sound, no turning over, nothing. The display was on and I could see I had juice, but nothing from starter.

I took the side panel off and verified everything. It turns out, it was this connector that I had loosened somehow. I ended up zip tying it so that it will not separate inadvertently.

04-23-2017, 09:40 PM	#1
prismways Join Date: Apr 2017 Location: Boston area Posts: 171	If your Vader ignition button doesn't work - check this! So I was strapping in all the hoses and loose wires on my bike and when I went to start it after everything was closed up, I noticed my electric start would not do anything. No sound, no turning over, nothing. The display was on and I could see I had juice, but nothing from starter. I took the side panel off and verified everything. It turns out, it was this connector that I had loosened somehow. I ended up zip tying it so that it will not separate inadvertently. Last edited by prismways; 04-24-2017 at 10:28 AM.
	2