Brozz too lean fix

JohnC · 01-03-2021, 11:52 AM

Hi,

I live in Southeast Michigan, about 600 feet elevation. I have my 2020 Brozz 250 currently with a 120 main jet, one washer on the needle and always 87 octane, no ethanol fuel. I started with a 105 main, and moved to a 115 for a few hundred miles, and it seemed it was still a little on the lean side, looking at the plug. I am currently finishing up a port and polish, so I got a real good look a the head, ports and piston. It is running a little rich. I guess I'll wait until I see any impact from the head work. I would rather a little rich, than lean. I would think 115 would be in the ball park for 1000 feet.

Thanks,
John

01-03-2021, 11:52 AM	#17
JohnC Join Date: Oct 2020 Location: Southeast Michigan Posts: 99	Hi, I live in Southeast Michigan, about 600 feet elevation. I have my 2020 Brozz 250 currently with a 120 main jet, one washer on the needle and always 87 octane, no ethanol fuel. I started with a 105 main, and moved to a 115 for a few hundred miles, and it seemed it was still a little on the lean side, looking at the plug. I am currently finishing up a port and polish, so I got a real good look a the head, ports and piston. It is running a little rich. I guess I'll wait until I see any impact from the head work. I would rather a little rich, than lean. I would think 115 would be in the ball park for 1000 feet. Thanks, John
	0