![]() |
#2 |
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
|
I really like the Yamaha, 4.1-gallon, XT225 fuel tank I installed on my Zong.
![]() ![]()
__________________
Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." ![]() 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 |
![]() |
![]() |
#3 |
Join Date: May 2006
Location: Yuma, Arizona
Posts: 9,035
|
I know, I know, the grass is greener, blah, blah--but if I could get one of those tanks on my TMEC, I would only need to fill up once a week....
__________________
"They say that life's a carousel, spinning fast you got to ride it well..." TGB Delivery Scooter 150 TMEC 200 Enduro--carcass is sadly rotting in the backyard |
![]() |
![]() |
#4 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
So cool! Was the XT225 tank a direct fit? How did you figure that out?
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
![]() |
![]() |
#5 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
I recommend that you remove that goofy ABS device on the front brake. It's the gold thing at the end of the brake hose.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
![]() |
![]() |
#6 |
Join Date: Sep 2014
Location: Santa Cruz, CA
Posts: 40
|
Thanks spud! Your thread on installing it onto your Zong helped a lot!
|
![]() |
![]() |
#7 |
Join Date: Sep 2014
Location: Santa Cruz, CA
Posts: 40
|
Thanks w&g! Pretty much a direct fit when I mounted 2 hockey pucks on each side of the frame where the tank sits. I pretty much followed spuds instructions to his zong and instructions from a tw forum
|
![]() |
![]() |
#8 | |
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
|
Quote:
![]()
__________________
Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." ![]() 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 |
|
![]() |
![]() |
#9 |
Join Date: Sep 2014
Location: Santa Cruz, CA
Posts: 40
|
![]()
Just bolted it on random extra brackets
|
![]() |
![]() |
#10 |
Join Date: Sep 2014
Location: Santa Cruz, CA
Posts: 40
|
Will it affect the way I ride/brake?
|
![]() |
![]() |
#11 |
Join Date: Jun 2009
Location: Brisbane, Queensland, Australia
Posts: 648
|
that s a groovy looking ride. do you plan to add a white polisport super motard front fender?
also: where s you license plate mounted? i can t tell from the second pic.
__________________
1971 Garelli Gulp 50cc with open ports and 16 mm Bing Carbie + 1980 Honda XL 223 ZS ![]() |
![]() |
![]() |
#12 | |
Join Date: Sep 2014
Location: Santa Cruz, CA
Posts: 40
|
Quote:
Thanks zingshoen! Probably not, I like it black and "Frankensteiny" I made it from the original fender. Just cut it and bolted the front half on top to shorten it Bolted it with a small 90 degree angle bracket onto the toolbox threads on the frame. I hated how my tool box emulated an exhaust. It looked tacky. And I didn't like how the original license plate holder extended out super far. Replaced it with a UFO fender that had a brake light and just drilled signals on the sides. |
|
![]() |
![]() |
#13 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
Not likely. If you remove it, change the brake fluid and bleed the air out properly, you'll have a predictable front brake. I don't trust the ABS device, and neither do several of the members here.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
![]() |
![]() |
#14 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
You got lucky, since your bike is totally different from Spud's. It's so nice how your seat follows the contour aof that tank! I might try the same thing on one of my bikes.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
![]() |
![]() |
#15 | |
Join Date: Jun 2009
Location: Brisbane, Queensland, Australia
Posts: 648
|
Quote:
![]()
__________________
1971 Garelli Gulp 50cc with open ports and 16 mm Bing Carbie + 1980 Honda XL 223 ZS ![]() |
|
![]() |
|
![]() |
![]() |
|
|