rokeat 110 pice of junk

idcountryboy1 · 07-14-2007, 05:43 PM

ok my lil bro bought a roketa 110 sport in the month we have had it its chani came off while riding in a parade and broke a piece off the cover the rear bolt that hold the rear to the frame has come and replaced with a antoher that also came out this on had a lock bolt on it and a lock washer i have had no problems with my db-27 200cc dirt bike but people theses atvs are crap we also found mig wire 4 time on welds were chig chog scerwed up i think roketa atvs should all be scrap

TeamCheap · 07-14-2007, 05:58 PM

Was the chain misalignged from factory or did it just stretch?

The chains stretch on these things alot at first and need to be checked/maintained often.

I have HONDA 300ex (bought used) and some nitwit removed the case saver, failed to maintain its chain and it piled into the case blowing a hole into it.So yeah I will fix it but it is to easy to avoid.

It can happen to just about any chain driven vehicle.

liverchip · 07-15-2007, 11:49 AM

Quote:

Originally Posted by TeamCheap

Was the chain misalignged from factory or did it just stretch?

The chains stretch on these things alot at first and need to be checked/maintained often.

I have HONDA 300ex (bought used) and some nitwit removed the case saver, failed to maintain its chain and it piled into the case blowing a hole into it.So yeah I will fix it but it is to easy to avoid.

It can happen to just about any chain driven vehicle.

Yep I agree, any toy will break with a lack of sensible maintenance. I have a Kazuma Falcon 110 and the thing has been bulletproof for about 2 years. Decent prep will same you a ton of heartache.

idcountryboy1 · 07-15-2007, 04:25 PM

i was only a week old

liverchip · 07-15-2007, 05:57 PM

Was the bike bought at a dealer?

AZ200cc · 07-15-2007, 06:03 PM

Can You post a pic? I am curious how it is set up...

TeamCheap · 07-15-2007, 06:06 PM

So was it bought new at a dealer or was it drop shipped to your door?

Was the chain and everything else checked before using it or was it just slapped together and ridden.
I guess it really doent matter at this point so maybe you should just start at the beginning and give the thing a good looking over to make sure it is all right.

I have looked at the china ATV's up close, not all of them but quit a few and have not been impressed with what I have seen there are few out there I'd like to get a closer look at still.

I've been putting together my 300ex today and it is going well.I have been putting it off for to long with working on my 200gy and my 70cc motoredbike(<lots of fun)I dont know if I'll get it done this summer.

idcountryboy1 · 07-19-2007, 11:16 PM

OK well we got a new carb it only took a day after we told john are dealer we also got a cdi and he gave it all to us for free he is also a family friend so he is pretty cool about it we can get little parts like handles and hand guards for little so now the bike is running like new :!: :!:

AZ200cc · 07-19-2007, 11:39 PM

I thought You were having chain and weld problems. :?

idcountryboy1 · 07-20-2007, 01:46 AM

we were able to fixs the welds and the chain was easy but then it wouldnt start but it is all good now

AZ200cc · 07-20-2007, 10:14 AM

Oh ok, Glad To hear You got it going again.

NewEnglandTrails · 07-20-2007, 05:31 PM

Quote:

Originally Posted by idcountryboy1

i was only a week old

I do believe the 110cc might be slightly to much machine for a week
old baby.. Its not suprising... all thats happened to it...

LOL...

NET

pedez2000 · 09-16-2007, 03:32 AM

selling profromance parts

up dating it when i can these parts fit the GY-6 honda clone's /made in china tiawan. roketa parts sunl parts tank parts lifan bmx freedom baja

www.sunlparts.net
www.roketaparts.net
www.sunl=parts.com
www.sunlparts.info

same site different links atv go-cart mini chopper dirt bike parts as well
need something you can't find or don't see on the site please email me. thanks

07-14-2007, 05:43 PM	#1
idcountryboy1 Join Date: Jul 2007 Location: blanchard idaho Posts: 52	rokeat 110 pice of junk ok my lil bro bought a roketa 110 sport in the month we have had it its chani came off while riding in a parade and broke a piece off the cover the rear bolt that hold the rear to the frame has come and replaced with a antoher that also came out this on had a lock bolt on it and a lock washer i have had no problems with my db-27 200cc dirt bike but people theses atvs are crap we also found mig wire 4 time on welds were chig chog scerwed up i think roketa atvs should all be scrap
	0

07-15-2007, 05:57 PM	#5
liverchip Join Date: Nov 2006 Location: Mystery Spot Posts: 1,223	Was the bike bought at a dealer? __________________ 2009 XR650L Big Red Pig Tusk bar risers 2007 X-Moto(Jetmoto) GY250 --mods--- 15/40 sprockets UNI Pod Filter 2007 Shineray TMS 200XYi--Betsy Betsy Mods:______________________ Acerbis DHH headlight FMF Powercore pipe Uni Pod Filter
	0

07-15-2007, 06:03 PM	#6
AZ200cc Join Date: Apr 2007 Location: Show Low Arizona Posts: 2,889	Can You post a pic? I am curious how it is set up... __________________ <br />2001 Suzuki DR200SE<br />1997 Suzuki RM250 YIKES<br />1995 Yamaha Breeze 125 daughters<br />1991 Honda XR80r Restored<br />maybe a 2003 Yamaha TTR90
	0

07-19-2007, 11:39 PM	#9
AZ200cc Join Date: Apr 2007 Location: Show Low Arizona Posts: 2,889	I thought You were having chain and weld problems. :? __________________ <br />2001 Suzuki DR200SE<br />1997 Suzuki RM250 YIKES<br />1995 Yamaha Breeze 125 daughters<br />1991 Honda XR80r Restored<br />maybe a 2003 Yamaha TTR90
	0

07-20-2007, 10:14 AM	#11
AZ200cc Join Date: Apr 2007 Location: Show Low Arizona Posts: 2,889	Oh ok, Glad To hear You got it going again. __________________ <br />2001 Suzuki DR200SE<br />1997 Suzuki RM250 YIKES<br />1995 Yamaha Breeze 125 daughters<br />1991 Honda XR80r Restored<br />maybe a 2003 Yamaha TTR90
	0

07-14-2007, 05:58 PM	#2
TeamCheap Join Date: Jun 2006 Location: directly under the earths sun............NOW Posts: 2,302	Was the chain misalignged from factory or did it just stretch? The chains stretch on these things alot at first and need to be checked/maintained often. I have HONDA 300ex (bought used) and some nitwit removed the case saver, failed to maintain its chain and it piled into the case blowing a hole into it.So yeah I will fix it but it is to easy to avoid. It can happen to just about any chain driven vehicle.
	0

07-15-2007, 04:25 PM	#4
idcountryboy1 Join Date: Jul 2007 Location: blanchard idaho Posts: 52	i was only a week old
	0

07-15-2007, 06:06 PM	#7
TeamCheap Join Date: Jun 2006 Location: directly under the earths sun............NOW Posts: 2,302	So was it bought new at a dealer or was it drop shipped to your door? Was the chain and everything else checked before using it or was it just slapped together and ridden. I guess it really doent matter at this point so maybe you should just start at the beginning and give the thing a good looking over to make sure it is all right. I have looked at the china ATV's up close, not all of them but quit a few and have not been impressed with what I have seen there are few out there I'd like to get a closer look at still. I've been putting together my 300ex today and it is going well.I have been putting it off for to long with working on my 200gy and my 70cc motoredbike(<lots of fun)I dont know if I'll get it done this summer.
	0

07-19-2007, 11:16 PM	#8
idcountryboy1 Join Date: Jul 2007 Location: blanchard idaho Posts: 52	OK well we got a new carb it only took a day after we told john are dealer we also got a cdi and he gave it all to us for free he is also a family friend so he is pretty cool about it we can get little parts like handles and hand guards for little so now the bike is running like new :!: :!:
	0

07-20-2007, 01:46 AM	#10
idcountryboy1 Join Date: Jul 2007 Location: blanchard idaho Posts: 52	we were able to fixs the welds and the chain was easy but then it wouldnt start but it is all good now
	0

09-16-2007, 03:32 AM	#13
pedez2000 Join Date: Apr 2007 Location: tennesse Posts: 95	selling profromance parts up dating it when i can these parts fit the GY-6 honda clone's /made in china tiawan. roketa parts sunl parts tank parts lifan bmx freedom baja www.sunlparts.net www.roketaparts.net www.sunl=parts.com www.sunlparts.info same site different links atv go-cart mini chopper dirt bike parts as well need something you can't find or don't see on the site please email me. thanks
	0